Garmin Boat Switch Installation Instructions Manual - Page 12
Browse online or download pdf Installation Instructions Manual for Marine Equipment Garmin Boat Switch. Garmin Boat Switch 27 pages. Pre-configured digital switching system
Print Page
Wire Label
SWITCH INPUT: CALIBRA
TION ENABLE
SWITCH INPUT: STORE
MIN TANK VALUES
SWITCH INPUT: STORE
MAX TANK VALUES
SWITCH INPUT: LIVEWELL
CYCLE ADJ
SWITCH INPUT: SPARE
Navigation and Anchor Light Wiring
The first three channels on this device can be used for navigation lighting to satisfy the international regulations
for preventing collisions at sea. Depending on the navigation-lighting configuration on your boat, you can
choose from three different options for activating these lights.
NOTE: You can view examples of common wiring installations including these navigation light options on the
Garmin website. Go to garmin.com/manuals/boatswitch/.
Option A (default): One connection for red/green navigation lights, and one connection for white navigation/
anchor lights
(Navigation Lights Option A, page
Option B: One connection for red/green/white navigation lights, and one connection for anchor lights
(Navigation Lights Option B, page
Option C: One connection for red/green/white navigation lights, one connection for steaming lights, and one
connection for anchor lights
Deactivated: The first three channels are not interconnected, and act as assignable independent switches.
These switches can still be used for lighting, but connected lights must be turned on and off independently of
one another
(Configuring The Navigation Light Option, page
12
Wire
Wire Color
Gauge
Black
18 AWG
Brown
18 AWG
Red
18 AWG
Orange
18 AWG
Yellow
18 AWG
13).
14).
(Navigation Lights Option C, page
Wire Function
Grounding this wire for 5 seconds places the device into
calibration mode. You must ground this wire again for
five seconds to exit calibration mode
Tank Sensors, page
19).
Ground this wire when configuring the tank sensors
brating the Tank Sensors, page
Ground this wire when configuring the tank sensors
(
(Calibrating the Tank Sensors, page
Ground this wire when configuring the live-well pump
cycle settings
(Configuring the Livewell Automatic Pump
Cycle Settings, page
20).
Unused
15).
22).
(Calibrating the
(Cali
19).
19).