AEG FAVORIT 64570 Vi User Information - Page 33

Browse online or download pdf User Information for Dishwasher AEG FAVORIT 64570 Vi. AEG FAVORIT 64570 Vi 44 pages. Aeg the fully integratable dishwasher
Also for AEG FAVORIT 64570 Vi: User Information (48 pages)

Print Page

Water Supply Connection

• The dishwasher must be plumbed into a cold water supply.

• The water pressure must be within the limits given in the technical

specifications. Your local Water Authority will advise you on the aver-

age mains pressure in your area.

• A shut-off device with a ¾" connection must be provided on site.

• The inlet hose has a filter to remove any impurities from the water

supply and a rubber seal. When fitting ensure that the filter and seal

are correctly positioned.

No water must escape from the fitting after the shut-off device

has been opened.

Water Outlet Hose Connection

• Ensure the drain hose is not bent or squashed as the could prevent or

slow down the discharge of water.

• The outlet hose should be connected to a water outlet provided in a

neighboring cupboard (not directly behind the unit).

• The dishwasher is fitted with a device to prevent the back flow of wa-

ter, which allows the installation height of the unit to be above the

outlet height.

• The highest point of the drain hose should never exceed the unit

height.