AEG FAVORIT 64570 Vi Informações do utilizador - Página 33
Procurar online ou descarregar pdf Informações do utilizador para Máquina de lavar loiça AEG FAVORIT 64570 Vi. AEG FAVORIT 64570 Vi 44 páginas. Aeg the fully integratable dishwasher
Também para AEG FAVORIT 64570 Vi: Informações do utilizador (48 páginas)
Imprimir página
Water Supply Connection
• The dishwasher must be plumbed into a cold water supply.
• The water pressure must be within the limits given in the technical
specifications. Your local Water Authority will advise you on the aver-
age mains pressure in your area.
• A shut-off device with a ¾" connection must be provided on site.
• The inlet hose has a filter to remove any impurities from the water
supply and a rubber seal. When fitting ensure that the filter and seal
are correctly positioned.
1
No water must escape from the fitting after the shut-off device
has been opened.
Water Outlet Hose Connection
• Ensure the drain hose is not bent or squashed as the could prevent or
slow down the discharge of water.
• The outlet hose should be connected to a water outlet provided in a
neighboring cupboard (not directly behind the unit).
• The dishwasher is fitted with a device to prevent the back flow of wa-
ter, which allows the installation height of the unit to be above the
outlet height.
• The highest point of the drain hose should never exceed the unit
height.
33