AEG OKO FAVORIT 5470 VI Operating Instructions Manual - Page 35

Browse online or download pdf Operating Instructions Manual for Dishwasher AEG OKO FAVORIT 5470 VI. AEG OKO FAVORIT 5470 VI 40 pages. Aeg dishwasher

Print Page

Connecting the water supply

Your dishwasher has been built in accordance with the valid regulations

governing water-consuming appliances and is equipped with safety devices

which prevent used water from flowing back into the drinking water mains.

Your dishwasher shall be connected to a cold water supply.

The supply hose is fitted with a screwed hose connection (to DIN 259) and

can be connected to an outlet valve (water tap) with male thread (3/4").

Suitable washers are supplied with the machine. Do not use any washers

other than these!

The nut of the screwed hose connection can be tightened by hand. If you re-

quire a supply hose which is longer than the one supplied, contact your local

Service Force Centre.

Never lengthen existing hoses.

Important note! The supply hose must not be kinked, squashed, or twisted.

The dishwasher should be connected to it's own water tap.

Minimum water pressure:

0,5 bar (5 N/cm2, 0,05 MPa).

If your water pressure is under 0,5 bar, please ask our service centre for

advice.

Maximum allowable water pressure:

8 bar (80 N/cm2, 0,8 MPa).

For a water pressure over 8 bar, a pressure-reducing valve (obtainable from

your specialist retailer), must be fitted upstream.