AEG OKO FAVORIT 5470 VI Manual de Instruções - Página 35
Procurar online ou descarregar pdf Manual de Instruções para Máquina de lavar loiça AEG OKO FAVORIT 5470 VI. AEG OKO FAVORIT 5470 VI 40 páginas. Aeg dishwasher
Imprimir página
Connecting the water supply
Your dishwasher has been built in accordance with the valid regulations
governing water-consuming appliances and is equipped with safety devices
which prevent used water from flowing back into the drinking water mains.
Your dishwasher shall be connected to a cold water supply.
The supply hose is fitted with a screwed hose connection (to DIN 259) and
can be connected to an outlet valve (water tap) with male thread (3/4").
Suitable washers are supplied with the machine. Do not use any washers
other than these!
The nut of the screwed hose connection can be tightened by hand. If you re-
quire a supply hose which is longer than the one supplied, contact your local
Service Force Centre.
Never lengthen existing hoses.
Important note! The supply hose must not be kinked, squashed, or twisted.
The dishwasher should be connected to it's own water tap.
Minimum water pressure:
0,5 bar (5 N/cm2, 0,05 MPa).
If your water pressure is under 0,5 bar, please ask our service centre for
advice.
Maximum allowable water pressure:
8 bar (80 N/cm2, 0,8 MPa).
For a water pressure over 8 bar, a pressure-reducing valve (obtainable from
your specialist retailer), must be fitted upstream.
35