Brother P-touch H500 Quick Setup Manual - Page 21

Browse online or download pdf Quick Setup Manual for Label Maker Brother P-touch H500. Brother P-touch H500 36 pages.

Print Page

After making sure that the power is off, remove the

rear cover on the back of the P-touch. If the batteries

are already in the P-touch, remove them.

Make sure that the power is turned off

when replacing batteries.

Insert six new AA-size alkaline batteries (LR6), or fully

charged Ni-MH rechargeable batteries (HR6), making

sure that the positive (+) and negative (-) ends of the

batteries match the positive (+) and negative (-) marks

inside the battery compartment.

Users of alkaline batteries

Always replace all six batteries at the

same time using brand new ones.

Users of Ni-MH rechargeable batteries

Always replace all six batteries at the

same time with fully charged ones.

Visit us at http://solutions.brother.com/

for the latest information about the

recommended batteries.

Attach the rear cover by inserting the three hooks at

the bottom into the slots on the P-touch, then pushing

down firmly until it snaps into place.

If you cannot attach the rear cover, check

to ensure the white lever is in the up

position. If not, lift the lever, and then

attach the cover.

Remove the batteries if you do not intend to use the P-touch for an extended period of

time.

Power Supply