Brother P-touch PT-D410 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Label Maker Brother P-touch PT-D410. Brother P-touch PT-D410 9 pages.
Also for Brother P-touch PT-D410: Manual (8 pages)

Print Page

Brother P-touch PT-D410 Quick Start Manual

• DO NOT forcibly bend or pull the USB Cable or AC Adapter.

• DO NOT touch the AC Adapter or plug with wet hands, otherwise an electrical shock may occur.

• Use only the specified AC Adapter.

• Use only the AC Adapter and USB Cable included with your Label Maker. Failure to do so may result in an

injury to yourself or others, or damage to the Label Maker, or other property. Brother does not assume any

responsibility for any accident or damage resulting from not using the specified AC Adapter and USB Cable.

• DO NOT connect the included AC Adapter and USB Cable to other products.

• Use the AC Adapter with standard electrical sockets (AC 100 V - 240 V 50/60 Hz).

• Insert the plug firmly into the electrical outlet.

• DO NOT use the batteries if they are damaged or leaking.

• Keep batteries away from infants. If batteries are ingested, contact emergency services immediately.

• DO NOT use sharp objects, such as tweezers or a metallic pen, to remove or replace batteries.

• If liquid (electrolyte) from the batteries gets into eyes, wash them immediately with clean water. Contact

emergency services immediately.

• DO NOT solder connections to the batteries.

• DO NOT use the batteries with the polarity (+) (-) reversed.

• DO NOT connect the + and - terminals with metal objects such as wire.

• DO NOT incinerate the batteries or dispose of them with household waste.

• Keep fingers and other body parts away from the Cutter unit.

• DO NOT touch the Cutter unit's blade or insert your fingers inside the

Tape Exit Slot, otherwise fingers and other body parts may be injured.

• DO NOT touch any metal parts near the Print Head. The Print Head

becomes very hot during and immediately after use. DO NOT touch it

directly with your hands.

CAUTION

Failure to observe instructions and warnings could result in minor or moderate injuries.

Label Maker, USB Cable, AC Adapter, Alkaline Batteries

• Use only the specified AA alkaline batteries (LR6).

• DO NOT use combinations of old and new batteries or combinations of different types, charging levels,

manufacturers, or models.

• DO NOT drop the Label Maker when removing it from the box or relocating it, otherwise you may get injured.

• Be careful when closing the Tape Cassette Compartment Cover. There is a risk of injury if your finger gets

pinched between the upper and lower parts of the cover.

• When you are not using the Label Maker, store it out of the reach of children. In addition, do not allow

children to put the Label Maker parts or labels in their mouths. If any object has been swallowed, seek

medical attention immediately.

• DO NOT leave the Label Maker or any tape within the reach of babies and children.

• Store the Label Maker on a flat, level, and stable surface.

• Remove the batteries and disconnect the AC Adapter if you do not intend to use the printer for an extended

period of time.

• DO NOT press on the Liquid Crystal Display (LCD).

• When disconnecting the AC Adapter from the electrical outlet, always hold the AC Adapter.

• DO NOT overload an electrical circuit with the AC Adapter.

• DO NOT open the Tape Cassette Compartment Cover when operating the Cutter unit.

• DO NOT apply excessive pressure to the Cutter unit.

Use the Label Maker

1. Print from the Label Maker

STEP

Enter Text

STEP

Preview Labels

STEP

Print Labels

Regulation

Federal Communications Commission (FCC) Supplier's Declaration of Conformity (USA)

Responsible Party: Brother International Corporation

200 Crossing Boulevard

Bridgewater, NJ 08807-0911, U.S.A.

TEL: (908) 704-1700

Product Name:

Label Maker

Model Number:

PT-D410

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This equipment may not cause harmful interference, and (2) this equipment

must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Important

• The enclosed interface cable should be used in order to ensure compliance with the limits

for a Class B digital device.

• Changes or modifications not expressly approved by Brother Industries, Ltd. could void the

user's authority to operate the equipment.

CAUTION

RISK OF EXPLOSION IF BATTERIES ARE REPLACED WITH AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

International ENERGY STAR

Compliance Statement (US only)

The purpose of the International ENERGY STAR

development and popularization of energy-efficient office equipment. As an ENERGY

STAR

Partner, Brother Industries, Ltd. has determined that this product meets the

ENERGY STAR

guidelines for energy efficiency.

Program is to promote the