Fujitsu Lifebook P7010D Bios Manual - Page 5

Browse online or download pdf Bios Manual for Laptop Fujitsu Lifebook P7010D. Fujitsu Lifebook P7010D 27 pages. P series
Also for Fujitsu Lifebook P7010D: Easy Manual (37 pages), Getting Started (2 pages)

Fujitsu Lifebook P7010D Bios Manual
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies which ATA
devices are installed.
Main
Type:
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
n
n
None
CD-ROM
n
Hard Disk
n
LBA Format
Total
---
Sectors:
Maximum
---
Capacity:
PhoenixBIOS Setup Utility
Advanced
Security
Primary Master [FUJITSU MHT2040AT -(PM)]
[Auto]
LBA Format
78140160
40008MB
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 2. Primary Master Submenu
Default
Description
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM if a
CD-ROM drive is installed at this connection. If Hard Disk is
selected, you must specify the number of Cylinders, Heads, and
Sectors for the drive.
Logical Block Addressing (LBA)
---
The total number of sectors on your hard disk
---
The maximum capacity of your hard disk
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may also be displayed.
Power
Boot
Info
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
Select
Sub-Menu
M a i n M e n u
Exit
F9
Setup Defaults
F10
Save and Exit
5