Fujitsu Lifebook P7010D Bios Manual - Page 7
Browse online or download pdf Bios Manual for Laptop Fujitsu Lifebook P7010D. Fujitsu Lifebook P7010D 27 pages. P series
Also for Fujitsu Lifebook P7010D: Easy Manual (37 pages), Getting Started (2 pages)
Print Page
Secondary Master Submenu of the Main Menu
The Secondary Master submenu identifies which ATA
devices are installed.
Main
Secondary Master [UJDA755 DVD/CDRW -(SM)]
Type:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field
Options
Type:
• Auto
• None
• Hard Disk
• CD-ROM
Cylinders:
• A number
between 0
and 65,535
Heads:
• A number
between 1 and 16
PhoenixBIOS Setup Utility
Advanced
Security
[Auto]]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 3. Secondary Master Submenu
Default
[Auto]
–—
–—
Note: Actual drive label shown may vary. Depending on the
drive type, information such as cylinders, heads and sectors
may also be displayed.
Power
Boot
Info
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
Select
Sub-Menu
Description
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is
selected, all of the following Set-up items do not appear. If Hard
Disk is selected, you must specify the number of Cylinders,
Heads, and Sectors for the drive. Select CD-ROM to select
parameters for CD-ROM drive.
This item appears only when the type is identified as Hard Disk.
When Hard Disk is selected, you can change the value. This field
is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
This item appears only when the type is identified as Auto or
Hard Disk. When Hard Disk is selected, you can change the
value. This field is changed by incrementing (pressing the
[Spacebar]) or by typing in the number.
M a i n M e n u
Exit
F9
Setup Defaults
F10
Save and Exit
7