Brother QL-1060N User Manual - Page 11

Browse online or download pdf User Manual for Label Maker Brother QL-1060N. Brother QL-1060N 24 pages. Label printer
Also for Brother QL-1060N: Network User's Manual (42 pages), User Manual (42 pages), Software User's Manual (40 pages), Network User's Manual (48 pages), Software User's Manual (48 pages), Network User's Manual (41 pages), User Manual (40 pages), User Manual (48 pages), User Manual (41 pages)

Print Page

2 Parts Description

Front

DK Roll compartment cover

Press and hold the ON/OFF button to turn

the QL-1050/1060N off. Pull up the left and

right levers on the machine under the top

cover, and open the cover.

Put the spool into the spool guides in the DK

Roll compartment.

Make sure that the spool arms are inserted firmly in

•

the spool guides on the left and right.

Insert the spool with the DK Roll located on the right

•

hand side of the QL-1050/1060N.

Thread the end of the DK Roll into

the slot until it aligns with the roller.

When unable to thread the end of the

DK Roll into the slot, thread it as far as

possible, and then close the cover.

Press the ON/OFF button to turn the

QL-1050/1060N on, and then press the

FEED button to set the roll.

Rear

LED lamp

ON/OFF button

CUT button

FEED button

Serial port

USB port

LAN port

(QL-1060N only)

STEP

Power cord

STEP