Brother QL-1060N User Manual - Page 12

Browse online or download pdf User Manual for Label Maker Brother QL-1060N. Brother QL-1060N 24 pages. Label printer
Also for Brother QL-1060N: Network User's Manual (42 pages), User Manual (42 pages), Software User's Manual (40 pages), Network User's Manual (48 pages), Software User's Manual (48 pages), Network User's Manual (41 pages), User Manual (40 pages), User Manual (48 pages), User Manual (41 pages)

Print Page
Brother QL-1060N User Manual
10
STEP 1 Getting started
4
Close the DK Roll compartment cover until it
clicks on both sides.

4 Connecting the Power Supply

Connect the power cord to the
QL-1050/1060N and then plug the
power cord into a electrical outlet.
Check that the electrical outlet is
•
220V-240V AC before plugging the
power cord.
Unplug the power cord from the
•
electrical outlet after you have finished
using the QL-1050/1060N.
Do not pull the power cord when
•
unplugging it from the electrical outlet.
The wire in the power cord may
become damaged.
Do not connect the QL-1050/1060N to
•
the computer until directed to do so
when installing the printer driver.

5 Installing the Label Tray

The machine contains a label tray
which can hold up to 10 individual
label sheets.
As shown right, install the label tray
to the front face of the machine.
When printing more than 10 labels
•
continuously using the auto cut
function, remove the paper guide to
prevent a paper jam.
The plug may differ by countries.