Brother QL-1110NWB Quick Setup Manual - Page 3

Browse online or download pdf Quick Setup Manual for Label Maker Brother QL-1110NWB. Brother QL-1110NWB 9 pages.
Also for Brother QL-1110NWB: Quick Setup Manual (9 pages), Manual (2 pages)

Print Page

1. Turn Power On/Off
2. Connect the Printer to a Computer
3. Install Printer Drivers and Software on a Computer
4. Troubleshooting

3. Connect the Power Cord

Connect the AC Power Cord to the printer. Then, plug the AC

Power Cord into an earthed electrical socket.

4. Load the DK Roll

Make sure that the printer is turned Off.

Pull the release levers on both sides of the printer to unlock the DK Roll

Compartment Cover.

Hold the printer by the front, and firmly lift the DK Roll Compartment Cover to

open it.

IMPORTANT

Before using the printer, remove the protective sheet (1) from the Label Output Slot.

Place the DK Roll into the Roll Spool Guide (1).

• Make sure that the Roll Spool Arm (2) is inserted firmly in the Roll Spool Guide.

• Make sure the Stabiliser (3) slides into the notch in the printer.