Fujitsu PRIMERGY TX120 S2 Service Supplement Manual - Page 24

Browse online or download pdf Service Supplement Manual for Server Fujitsu PRIMERGY TX120 S2. Fujitsu PRIMERGY TX120 S2 38 pages.

Print Page

Replacing the system fans

4.3

Replacing the system fans

CAUTION!

The system fans are non-redundant, you have to replace the defective

system fan immediately.

System fan 1

Figure 9: Removing the system fan 1

Ê Open the server as described in the

Ê Remove the system fan 1 cable from the adapter connector.

Ê Carefully push the system fan in direction of the arrows

and pull the lower rubber feet out of the inlet gate.

Ê Carefully remove the system fan by pulling upward

Ê Insert the new system fan. All rubber feet must engage into the inlet gate.

Make sure that the cable has been routed in the right way

page

24).

Ê Plug the system fan cable on the adapter connector.

section "Preparation" on page

Service Supplement

Replacement routines

17.

(figure 9 on page

(figure 9 on

TX120 S2

24)