Fujitsu 5530C2 - fi - Document Scanner Getting Started - Page 25

Browse online or download pdf Getting Started for Scanner Fujitsu 5530C2 - fi - Document Scanner. Fujitsu 5530C2 - fi - Document Scanner 28 pages. Color departmental scanner
Also for Fujitsu 5530C2 - fi - Document Scanner: Specifications (2 pages)

Print Page

Appendix2

When operating the scanner, the

ARNI N G

ADF's inside glass becomes very

hot.

Before you clean inside the scan-

ner, turn off its power and unplug

the AC adapter from the outlet. Wait

for at least 15 minutes.

Do not turn off the scanner when

you clean the Feed rollers or Eject

rollers.

■ Cleaning Materials

Cleaning

Parts No.

Materials

Cleaner F1

PA03950-

0352

Lint-free dry

- Commercially available one

cloth

For details about the cleaning materials, contact the

FUJITSU scanner dealer where you purchased the scan-

ner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-

ened with the Cleaner F1.

It may take long before the cleaner

ATTENTION

vaporizes if a large quantity is used.

When cleaning the scanner parts,

dampen a cloth with modest quantities

of the cleaner. In addition, wipe off the

cleaner completely with a soft lint-free

cloth to leave no residue on the surface

of the cleaned parts.

DAILY CARE

Remarks

1 bottle

Moisten a cloth with

this fluid and wipe the

scanner clean.

fi-5530C Image Scanner Getting Started

■ Locations and Cycle for Cleaning

Part to clean

Pad ASSY

Pick roller

Feed rollers

Plastic rollers

Eject rollers

Sheet guides

Glass

Ultra sonic sensor

The scanner must be cleaned more fre-

ATTENTION

quently if you scan any of the following

type of sheets:

•

Documents of coated paper

•

Documents that are almost completely

covered with printed text or graphics

•

Chemically treated documents such

as carbonless paper

•

Documents containing a large amount

of calcium carbonate

•

Documents written by pencil

•

Documents on which the toner is not

fused sufficiently.

For details on the cleaning the ADF, refer to section 3.2

"Cleaning the ADF" of "fi-5530C2 Operator's Guide"

on the Setup CD-ROM."

Standard Cleaning Cycle

Clean these parts after every

5,000 scans.

AP-4