Fujitsu FI-4120C2 - Document Scanner Getting Started - Page 14
Browse online or download pdf Getting Started for Scanner Fujitsu FI-4120C2 - Document Scanner. Fujitsu FI-4120C2 - Document Scanner 28 pages. Image scanner
Also for Fujitsu FI-4120C2 - Document Scanner: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Brochure & Specs (2 pages)
Print Page
2.3 Installing the Scanner
Application
Both the scanner driver and image capturing application
software (called "application" hereafter) must be
installed on your PC.
Two types of drivers for scanner, FUJITSU TWAIN 32
Scanner Driver and FUJITSU ISIS Scanner Driver, as
well as two software applications, ScandAll 21 and
QuickScan Pro™, are provided with this product. The
following sections describe how to install each driver
and application.
For FUJITSU TWAIN32 Scanner Driver
■ Preparation
Confirm the following items before installing the appli-
cation.
• Remove the Setup CD-ROM from its package,
but do not insert the Setup CD-ROM into the CD
driver yet.
• Confirm that the scanner is correctly connected
to your PC.
For details on how to connect the scan-
ner, refer to "2.2 Connecting the Scan-
HINT
ner to Your PC" on page 3.
• Uninstall any older versions of FUJITSU
TWAIN 32 driver if already installed.
Uninstall [Scanner Utility for Microsoft
ATTENTION
Windows] from [Add/Remove Pro-
grams] of the control panel.
• There are two types of FUJITSU TWAIN 32:
One of the following driver software will be
installed automatically according to your Oper-
ating System (OS).
For Windows 98, Windows Me, Windows 2000,
and Windows XP:
FUJITSU TWAIN32 V9
For Windows 95, Windows NT 4.0:
FUJITSU TWAIN32 V8
ASPI Manager V4.01 or later is required
(generally comes with SCSI board products).
5
■ Installing the FUJITSU TWAIN32
Scanner Driver
Windows XP screenshots are used in
this section as examples. The windows
HINT
and operations may slightly vary
depending on your OS
1. Press the power button to turn on the scanner.
2. Turn on your PC and log on to Windows.
When using Windows NT 4.0, Win-
ATTENTION
dows 2000 or Windows XP, log on as
a user with "Administrator" privileges
(privileges of the administrator of your
PC).
3. If the scanner is automatically detected, [Found
New Hardware Wizard] or [Add/Remove Hard-
ware Wizard] dialog box will appear. Click [Can-
cel] to close the Wizard window.
Windows XP screen shots are used in this section.
The windows and operations may vary
slightly depending on your OS.
HINT
4. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
This screen may not appear when the
ATTENTION
"Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this
CD-ROM directly from the "Explorer"
or "My Computer".
.