Fujitsu FI-4120C2 - Document Scanner Getting Started - Page 12
Browse online or download pdf Getting Started for Scanner Fujitsu FI-4120C2 - Document Scanner. Fujitsu FI-4120C2 - Document Scanner 28 pages. Image scanner
Also for Fujitsu FI-4120C2 - Document Scanner: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Brochure & Specs (2 pages)
Print Page
Chapter2
2.1 Installing the Scanner
1. Place the scanner at its installation site.
For details on the scanner's dimensions and required
installation space, refer to "fi-4120C2 Operator's
Guide" "7.2 Installation Specifications" in the Setup
CD-ROM.
2. Attach the ADF Paper Chute.
Hold the ADF paper chute and insert its tabs into the
corresponding slots in the scanner as shown in the
figure below.
The Side guides of the ADF paper chute have to face
up.
ADF paper chute
Side guide
3. Connect the AC adapter.
Use only the AC adapter provided by
ATTENTION
the manufacturer.
1) Connect the AC cable to the AC adapter.
3
INSTALLATION OF THE SCANNER
Tab
2) Connect the AC adapter connector to the scan-
ner's DC inlet.
3) Plug the AC cable into the outlet.
The Function Number Display and the
LED may flash for an instant when
HINT
plugging the AC cable into the scanner.
2.2 Connecting the Scanner to
Your PC
When running Windows 95 or Windows NT 4.0, con-
nect the SCSI interface cable.
When running Windows 98, Windows Me, Windows
2000, or Windows XP, connect either the USB interface
cable or the SCSI interface cable.
Connect only one of the USB or SCSI
ATTENTION
interface cables. Windows 95 and
Windows NT 4.0 do not support USB
interface.
■ Connecting the USB Interface Cable
1. Connect the USB interface cable to the USB
interface connector.