Fujitsu FI-4120C2 - Document Scanner Початок роботи - Сторінка 12

Переглянути онлайн або завантажити pdf Початок роботи для Сканер Fujitsu FI-4120C2 - Document Scanner. Fujitsu FI-4120C2 - Document Scanner 28 сторінок. Image scanner
Також для Fujitsu FI-4120C2 - Document Scanner: Посібник з інсталяції Посібник з інсталяції (7 сторінок), Посібник з інсталяції Посібник з інсталяції (9 сторінок), Брошура та технічні характеристики (2 сторінок)

Chapter2

1. Place the scanner at its installation site.

For details on the scanner's dimensions and required

installation space, refer to "fi-4120C2 Operator's

Guide" "7.2 Installation Specifications" in the Setup

CD-ROM.

2. Attach the ADF Paper Chute.

Hold the ADF paper chute and insert its tabs into the

corresponding slots in the scanner as shown in the

figure below.

The Side guides of the ADF paper chute have to face

up.

ADF paper chute

Side guide

3. Connect the AC adapter.

Use only the AC adapter provided by

ATTENTION

the manufacturer.

1) Connect the AC cable to the AC adapter.

INSTALLATION OF THE SCANNER

Tab

2) Connect the AC adapter connector to the scan-

ner's DC inlet.

3) Plug the AC cable into the outlet.

The Function Number Display and the

LED may flash for an instant when

HINT

plugging the AC cable into the scanner.

2.2 Connecting the Scanner to

Your PC

When running Windows 95 or Windows NT 4.0, con-

nect the SCSI interface cable.

When running Windows 98, Windows Me, Windows

2000, or Windows XP, connect either the USB interface

cable or the SCSI interface cable.

Connect only one of the USB or SCSI

ATTENTION

interface cables. Windows 95 and

Windows NT 4.0 do not support USB

interface.

■ Connecting the USB Interface Cable

1. Connect the USB interface cable to the USB

interface connector.