Fujitsu fi-4220C2 Getting Started - Page 12
Browse online or download pdf Getting Started for Scanner Fujitsu fi-4220C2. Fujitsu fi-4220C2 30 pages. Flatbed scanner
Also for Fujitsu fi-4220C2: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Brochure & Specs (2 pages), Installation Procedures (3 pages), Cleaning Instructions (2 pages)
Print Page
Chapter 2
2.1 Installing the Scanner
1. Place the scanner at its installation site.
For details on the scanner's dimensions and
required installation space, refer to "fi4220C
Operator's Guide" "7.2 Installation Specifica-
tions" in the Setup CD-ROM.
2. Unlock the Shipping lock.
The carrier unit inside the scanner is fixed in
place by the shipping lock to prevent the scanner
from becoming damaged during transportation
from the factory.
After transporting and placing the scanner, tilt the
scanner (approx. 30 degrees) and release the
Shipping lock.
Approx.30
degrees
Lock
3. Attach the ADF paper chute.
Hold the ADF paper chute and insert its tabs into
the corresponding slots in the scanner as shown in
the figure below.
The Side guides of the ADF paper chute have to
face up.
3
INSTALLATION OF THE SCANNER
Release
ADF paper chute
Side guide
4. Connect the AC adapter.
Use only the AC adapter provided by
ATTENTION
the manufacturer.
1) Connect the AC cable to the AC adapter.
2) Connect the AC adapter connector to the scan-
ner's DC inlet.
3) Plug the AC cable into the outlet.
The Function Number Display and the
LED may flash for an instant when
HINT
plugging the AC cable into the scanner.
Tab