Fujitsu fi-4220C2 Başlarken - Sayfa 12

Tarayıcı Fujitsu fi-4220C2 için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu fi-4220C2 30 sayfaları. Flatbed scanner
Ayrıca Fujitsu fi-4220C2 için: Kurulum Prosedürleri Kılavuzu (7 sayfalar), Kurulum Prosedürleri Kılavuzu (9 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Kurulum Prosedürleri (3 sayfalar), Temizlik Talimatları (2 sayfalar)

Chapter 2

1. Place the scanner at its installation site.

For details on the scanner's dimensions and

required installation space, refer to "fi4220C

Operator's Guide" "7.2 Installation Specifica-

tions" in the Setup CD-ROM.

2. Unlock the Shipping lock.

The carrier unit inside the scanner is fixed in

place by the shipping lock to prevent the scanner

from becoming damaged during transportation

from the factory.

After transporting and placing the scanner, tilt the

scanner (approx. 30 degrees) and release the

Shipping lock.

Approx.30

degrees

Lock

3. Attach the ADF paper chute.

Hold the ADF paper chute and insert its tabs into

the corresponding slots in the scanner as shown in

the figure below.

The Side guides of the ADF paper chute have to

face up.

INSTALLATION OF THE SCANNER

Release

ADF paper chute

Side guide

4. Connect the AC adapter.

Use only the AC adapter provided by

ATTENTION

the manufacturer.

1) Connect the AC cable to the AC adapter.

2) Connect the AC adapter connector to the scan-

ner's DC inlet.

3) Plug the AC cable into the outlet.

The Function Number Display and the

LED may flash for an instant when

HINT

plugging the AC cable into the scanner.

Tab