Fujitsu fi-5000N Getting Started - Page 26

Browse online or download pdf Getting Started for Scanner Fujitsu fi-5000N. Fujitsu fi-5000N 29 pages. Fujitsu fi-5000n: user guide
Also for Fujitsu fi-5000N: Technical Specifications (2 pages)

Print Page
Fujitsu fi-5000N Getting Started
Appendix 2
Before you clean the fi-5000N, turn off its power and unplug the AC adapter
from the outlet.

■ Cleaning Materials

Cleaning Materials
Cleaner F1
(or isopropyl alcohol)
Lint-free dry cloth
* For details about the cleaner F1, contact the FUJITSU dealer where you purchased the fi-5000N.
■ Parts to Clean and When
Part to clean
Cover
Fingerprint Sensor
ATTENTION
AP-3
Daily Care
Parts Number
CA99501-0013
Commercially available one
Cleaning Method
Wipe the Cover with a lint-free dry
cloth.
Wipe the Fingerprint Sensor gently
with a lint-free dry cloth.
Cleaning the Fingerprint Sensor
When the fingerprint sensor presents the following, the sensor might not function cor-
rectly. Clean the sensor surface on a regular basis.
•
Sensor surface is dirty with dust or any other dirt
•
Sensor surface is wet.
•
There are dew drops on the sensor surface.
Clean the fingerprint sensor when the following problems occurs. Cleaning the sensor
might solve such problems.
•
The Display Message shows "Sensor surface not clean. Please wipe sensor, and
restart device".
•
Although the finger is away from the sensor, the Display Message keeps showing
"Remove your finger from the sensor".
•
Fingerprint registration failures and/or fingerprint identification failures occur fre-
quently.
Remarks
1 bottle
Moisten the cloth with this fluid and wipe the
scanner clean.(*)
Do not use it for cleaning printed characters,
logos and marking areas.
Do not splash any liquids or allow the
fi-5000N to get wet.
Do not use flammable solvents such as
benzine.
Remarks