Fujitsu FI-5900C Getting Started - Page 15

Browse online or download pdf Getting Started for Scanner Fujitsu FI-5900C. Fujitsu FI-5900C 30 pages. Consumable replacement and cleaning instructions
Also for Fujitsu FI-5900C: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Installation Procedures (3 pages), Brochure & Specs (2 pages), Supplementary Manual (4 pages), Getting Started (30 pages), Brochure & Specs (4 pages), Consumable Replacement And Cleaning Instructions (24 pages), Replacement Procedure (22 pages), Cleaning Instructions (2 pages)

Print Page
Fujitsu FI-5900C Getting Started
ASPI Manager V4.01 or later is required (the
generally comes with SCSI board products).
■ Installing the FUJITSU TWAIN32

Scanner Driver

Windows XP screenshots are used in this
HINT
section. The windows and operations may
vary slightly depending on your OS
1. Open the hopper.
Be sure to open the hopper before turning
ATTENTION
on the power with the Power button.
2. Press the power button to turn the scanner ON.
3. Turn on your PC and log on to Windows.
When using Windows NT 4.0, Windows
ATTENTION
2000 or Windows XP, log on as a user with
"Administrator" privileges.
⇒
The scanner is automatically detected and a
"Welcome to the Found New Wizard" (or
"Welcone to Add Hardware Wizard") screen
appears.
4. Click the [Cancel] button and close the wizard
screen at the moment.
.
Power button
Hopper
fi-5900C Image Scanner Getting Started
5. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN>
appears.
This screen may not appear when the
ATTENTION
"Autoplay" setting of your CD drive is off.
In this case, run "Install.exe" in this CD-
ROM directly from "Explorer" or "My Com-
puter".
6. Click [INSTALL PRODUCTS]
driver].
7. The Error Recovery Guide Installation window
appears.
The Error Recovery Guide is a software that dis-
plays troubleshooting information on screen when
any scanner error occurs. Although this soft-
ware's installation is highly recommended, it can
be installed later if you do not install it now.
When you select [Yes] for installing the
ATTENTION
Error Recovery Guide, [Choose Setup Lan-
guage] window appears. Select a language
and follow the instructions in the window.
Error Recovery Guide will automatically
continue finishing its installation.
[TWAIN
7