Fujitsu fi-680PRB Operator's Manual - Page 7
Browse online or download pdf Operator's Manual for Scanner Fujitsu fi-680PRB. Fujitsu fi-680PRB 26 pages. Imprinter
Print Page
WARNING
The following describes important warnings for using
this product.
Do not insert or drop any foreign objects
(water, liquids, small metal objects, etc.) into
the opening sections on the scanner.
If foreign objects get inside the scanner,
immediately disconnect the power cable from
the AC outlet.
Then, contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service
provider. Pay particular attention to this
warning in households where there are small
children.
If the scanner is damaged for any reason,
immediately disconnect the power cable from
the AC outlet. Then, contact your FUJITSU
scanner dealer or an authorized FUJITSU
scanner service provider.
In the following situation, immediately
disconnect the power cable from the AC outlet.
Not doing so may cause a fire or electric shock.
Smoke or heat coming from the scanner is
detected.
Strange noise or smell is detected.
Foreign objects (water, liquids, small metal
objects, etc.) get inside the scanner.
Other problems which indicate a scanner
failure are detected.
Then, contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service
provider. Never try fixing such problems by
yourself. Doing so is dangerous.
Do not take apart or modify the scanner as
high-voltage components inside the scanner
are dangerous. PFU assumes no liability to any
damage caused by taking apart the scanner,
as doing so is not covered under the warranty.
The area around the part to which this warning
label is affixed can become very hot.
To avoid burns, never touch around the area
indicated by this label.
Firmly insert the power cable into the AC
outlet. Not doing so may cause a fire or electric
shock.
Use the scanner only at the indicated power
voltage and current. Do not connect to
multiple-power strips. Improper power voltage
or current might cause a fire or electric shock.
Use only power cables provided with the
scanner. Do not use any extension cords. Not
following these instructions may cause
abnormal heat or a fire. Do not also use the
power cable provided with the scanner for
other devices, since this might cause problems
such as an equipment failure, or an electric
shock.
Do not install in places that are damp or
subject to smoke, steam, or dust, as this may
cause a fire or electric shock.
Do not install the scanner in the following
locations which are subject to high
temperature, humidity, less ventilation, or dust.
If placed in an area subject to high
temperature, the cover may become
overheated and deformed, causing the
scanner to become hot, resulting in a fire.
Use the scanner in a well-ventilated area.
A place near heat-radiating devices such as
stoves or electric heaters, or flammable
items such as volatile inflammable materials
or curtain.
A place such as a bathroom, shower room,
or swimming pool where it may easily get
wet.
A place under direct sunlight, in a car under
the scorching sun, or near heating
apparatus where it may get hot.
To avoid injuries, do not place the scanner in
an area where small children may be able to
reach.
Before moving the scanner, be sure to
disconnect the power cable from the AC outlet,
and all other interface cables. Make sure that
the floor is free of any obstructions.
Do not move the scanner with the power and
interface cables connected as this can damage
the cables, which can later cause a fire, electric
shock as well as injuries.
Do not touch the power cable with wet hands.
Doing so might cause an electric shock.
When removing the power cable from the AC
outlet, make sure to hold the power plug and
not the cable. Pulling the power cable may
damage it, which may cause a fire or electric
shock.
6