Fujitsu fi-680PRB Operator's Manual - Page 8
Browse online or download pdf Operator's Manual for Scanner Fujitsu fi-680PRB. Fujitsu fi-680PRB 26 pages. Imprinter
Print Page
Do not use a damaged power cable. Also, do
not insert any cables or power plugs into loose
sockets. Doing so may cause a fire or electric
shock.
Be careful of the following when handling the
power cable:
Do not modify the power cable.
Do not place heavy objects on the power
cable.
Do not pull or bend the power cable.
If the power cable is damaged, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Do not place heavy objects on the scanner or
perform other work on top of the scanner.
Doing so might cause injuries or an equipment
failure.
Do not use the scanner while covered with a
blanket, etc. Doing so may raise the
temperature inside and cause a fire.
Avoid getting a sleeve, necktie, or hair caught
up in any scanner mechanism during scanning
since this may cause injuries.
Do not touch the heated section such as the
bottom of the scanner for a long time. Doing so
may cause a low-temperature burn on your
skin.
When the scanner is not going to be used for a
long period of time, be sure to disconnect the
power cable from the AC outlet. Not doing so
may cause a fire or electric shock.
Do not use any aerosol sprays or alcohol
based sprays to clean the scanner. Dust blown
up by strong air from the spray may enter the
inside of the scanner. This may cause the
scanner to fail or malfunction. Sparks, caused
by static electricity, generated when blowing off
dust and dirt from the outside of the scanner
may cause a fire.
Check the following items once a month:
The power cable is firmly inserted into the
AC outlet.
The power cable is not emitting abnormal
heat, or the power cable is not rusted or
bent.
Dust is not accumulated on the power
cable. If so, wipe off any dust with a soft, dry
cloth.
The power cable does not have any cracks
or scratches.
If any abnormality is detected, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Make sure to ground to avoid electric shock.
Be sure to ground before plugging into the AC
outlet. Unplug from the outlet before removing
the ground connection.
CAUTION
The following describes important cautions for using this
product.
When installing the scanner on a table, make
sure that the table is flat and level. Place the
scanner so that none of its parts extend
beyond the edge of the table, otherwise it may
fall or collapse and cause injuries.
Install the scanner away from strong magnetic
fields and other sources of electronic noise.
Protect the scanner against any static
electricity and choose a static-free place to
install the scanner.
Static electricity can cause the scanner to
malfunction.
If there is an electrical storm, disconnect the
power cable from the AC outlet. Lightening can
travel through wires and water pipes and
damage the scanner, which may damage your
property.
Do not supply the power from the AC outlet
where the devices requiring much power such
as copying machines or paper shredders are
connected.
Do not block the ventilation ports. Blocking the
ventilation ports generates heat inside of the
scanner, which may result in a fire or scanner
failure.
Do not use the scanner immediately after
moving it from a cold place into a warm room.
Condensation may occur, which might lead to
scanning errors. Let the scanner dry for one or
two hours before you use it.
When handling documents, be careful not to
cut your fingers with them.
When carrying the scanner outside while it is
raining or snowing, pay special attention so the
scanner does not get wet.
If the scanner gets wet, wipe it or wait until it
dries.
When transporting the scanner, never carry it
alone. The scanner is heavy.
LED light source of the scanner is not exposed
in normal use, and the amount of LED light
leakage, if any, does not pose any risk of eye
damage.
Do not disassemble, repair, or customize the
scanner by yourself.
Direct exposure to the LED light source could
cause problems with visual acuity.
7