Fujitsu ScanSnap FI-4110EOX2 Getting Started Manual - Page 15
Browse online or download pdf Getting Started Manual for Scanner Fujitsu ScanSnap FI-4110EOX2. Fujitsu ScanSnap FI-4110EOX2 18 pages. Color image scanner
Also for Fujitsu ScanSnap FI-4110EOX2: Installation Procedures (2 pages), Specifications (2 pages)
Print Page
5.
Push in the center of the ADF to return it to its
original position.
Push in center.
You should hear the ADF click when it returns to its
original position.
6.
Click the "ScanSnap! Monitor" icon
tray, and select [Check consumable supplies...] from
the menu that is displayed.
7.
Click the [Reset] button in the "Check consumable
status" window.
5.3. Replacing the Pick Roller
Replace the pick roller by the following procedure.
1.
Remove the document if there is a document on the
ADF paper chute.
2.
Open out the ADF towards you while lifting up the
cover open lever. And remove the ADF paper chute.
ADF
3.
Remove the Pick roller.
Push the claw on the Pick roller inwards, lift up the
handle while turning it in the direction of the arrow,
and remove the Pick roller. The shaded part in the
figure is the part to be replaced.
4.
in the task
5.
6.
7.
ADF paper chute
Cover open lever
Replace shaded part.
When attaching a new Pick roller, insert the Pick
roller so that its claw fits into the hole on the Pick
roller on the scanner.
Make sure that the Pick roller is
ATTENTION
completely attached. If the Pick roller is
not completely attached, document
jams or other feed errors may occur.
Push in the center of the ADF to return it to its
original position. Attach the ADF paper chute.
ADF
Push in center.
You should hear the ADF click when it returns to its
original position.
Click the "ScanSnap! Monitor" icon
tray, and select [Check consumable supplies...] from
the menu that is displayed.
Click the [Reset] button in the "Check consumable
status" window.
ScanSnap! fi-4110EOX2 Getting Started | 13
Claw
Handle
ADF paper chute
in the task