Fujitsu ScanSnap iX500 Getting Started Manual - Page 11

Browse online or download pdf Getting Started Manual for Scanner Fujitsu ScanSnap iX500. Fujitsu ScanSnap iX500 17 pages. Windows
Also for Fujitsu ScanSnap iX500: Getting Started Manual (16 pages), Quick Setup Manual (3 pages), Getting Started (18 pages), Safety Precautions (11 pages), Manual (2 pages), Quick Start Manual (2 pages), Wi-Fi Connection Manual (41 pages)

Print Page
Fujitsu ScanSnap iX500 Getting Started Manual

Scan Test (USB Connection)

After you perform a scan, check the linkage with applications.
For details on documents that can be scanned with the ScanSnap, refer to "ScanSnap Overview" in the
Operator's Guide.
ATTENTION
If the ScanSnap Manager icon is
mobile device. When the connection between the mobile device and the ScanSnap is disconnected, the
ScanSnap Manager icon changes to
1.
Load a document in the ScanSnap.
1. Pull the stacker on the ADF top section towards you.
2. Prepare to load a document in the ScanSnap.
3. Load the document on the ADF paper chute (cover), and adjust the side guides to the size of the
document.
1.
Stacker
2.
Press the [Scan] button on the ScanSnap.
Scanning starts. The Quick Menu appears when
scanning is completed.
ATTENTION
If scanning does not start, refer to "Troubleshooting"
in the ScanSnap Manager Help.
(
)/
(
)/
2.
Pull Out the Extension
Open the Side
Guides
Raise the
Stacker
(
), exit ScanSnap Connect Application on the
(
).
11
3.
Set the
Document
Face-down
and Top-first