Fujitsu ScanSnap iX500 시작하기 매뉴얼 - 페이지 11
{카테고리_이름} Fujitsu ScanSnap iX500에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap iX500 17 페이지. Windows
Fujitsu ScanSnap iX500에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (16 페이지), 빠른 설정 매뉴얼 (3 페이지), 시작하기 (18 페이지), 안전 주의사항 (11 페이지), 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), Wi-Fi 연결 매뉴얼 (41 페이지)
페이지 인쇄
Scan Test (USB Connection)
After you perform a scan, check the linkage with applications.
For details on documents that can be scanned with the ScanSnap, refer to "ScanSnap Overview" in the
Operator's Guide.
ATTENTION
If the ScanSnap Manager icon is
mobile device. When the connection between the mobile device and the ScanSnap is disconnected, the
ScanSnap Manager icon changes to
1.
Load a document in the ScanSnap.
1. Pull the stacker on the ADF top section towards you.
2. Prepare to load a document in the ScanSnap.
3. Load the document on the ADF paper chute (cover), and adjust the side guides to the size of the
document.
1.
Stacker
2.
Press the [Scan] button on the ScanSnap.
Scanning starts. The Quick Menu appears when
scanning is completed.
ATTENTION
If scanning does not start, refer to "Troubleshooting"
in the ScanSnap Manager Help.
(
)/
(
)/
2.
Pull Out the Extension
Open the Side
Guides
Raise the
Stacker
(
), exit ScanSnap Connect Application on the
(
).
11
3.
Set the
Document
Face-down
and Top-first