Fujitsu ETERNUS DX Disk Configuration Manual - Page 3

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 29 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Fujitsu ETERNUS DX Disk Configuration Manual
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX/AF to a server running Solaris OS and using Fujitsu Fibre Channel cards via a Fibre Channel inter-
face.
This manual is used when performing the setup procedure described in "Installing Drivers and Setting Up the
Server" and "Recognizing the Logical Units" of the "Configuration Guide -Server Connection- (Fibre Channel)
for Oracle Solaris".
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX/AF, server, OS, Fibre Channel cards, and drivers.
Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as
product trademarks and product names. For storage systems that are supported by the OS, refer to the Server
Support Matrix of the ETERNUS DX/AF.
The Contents and Structure of this Manual
This manual is composed of the following six chapters and an appendix.
"Chapter 1 Workflow" (page 5)
This chapter describes the workflow required to establish a connection between a server with Fujitsu Fibre
Channel cards and an ETERNUS DX/AF.
"Chapter 2 Installing the Fibre Channel Card Driver" (page 7)
This chapter describes how to install the Fibre Channel card driver.
"Chapter 3 Installing the hddv Driver" (page 8)
This chapter describes how to install the hddv driver that is required when connecting the ETERNUS DX/AF
storage systems and a Fujitsu driver equipped server in a single-path configuration.
"Chapter 4 Setting Up the Server" (page 9)
This chapter describes how to set up the server for different connection topologies.
"Chapter 5 Setting Up the Server to Recognize the Logical Units" (page 18)
This chapter describes how to make the server recognize the LUNs of the ETERNUS DX/AF.
"Chapter 6 Required Driver Parameters" (page 22)
This chapter describes how to set up the Fujitsu Fibre Channel card driver.
An appendix contains the various management tables that are used in "Chapter 4 Setting Up the Server".
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
3
Copyright 2017 FUJITSU LIMITED
Preface
15th Edition
April 2017
P3AM-3712-15ENZ0