Fujitsu ETERNUS DX Disk Configuration Manual - Page 5

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 29 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page
Fujitsu ETERNUS DX Disk Configuration Manual
Chapter 1
Workflow
This chapter describes the driver settings required to establish a connection between a server with Fujitsu
Fibre Channel cards and an ETERNUS DX/AF.
Workflow
Installing the Fibre Channel Card Driver
Install the driver. Download the proper driver from the Fujitsu web-site as required.
•
"Chapter 2 Installing the Fibre Channel Card Driver" (page 7)
Used for driver installation
•
Documentation provided with the product
-
Creating Various Management Tables
Enter the necessary information in the "WWN Instance Management Table for the Server", "WWN In-
stance Management Table for Storage System", and "Target Binding Table".
"Chapter 4 Setting Up the Server" (page 9)
•
"Appendix A Various Management Table Templates" (page 25)
•
Editing the Configuration File
Set the driver parameters by editing the configuration file.
"Chapter 4 Setting Up the Server" (page 9)
•
"Chapter 6 Required Driver Parameters" (page 22)
•
Check the settings using the "grmpdautoconf" command
•
-
ETERNUS Multipath Driver product manual
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
5
Copyright 2017 FUJITSU LIMITED
P3AM-3712-15ENZ0