Fujitsu ETERNUS DX Disk Configuration Manual - Page 21

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 43 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page
Fujitsu ETERNUS DX Disk Configuration Manual
Chapter 8
Checking Connections
8.1

Turning On the Devices

To turn on the connected devices, use the following procedure:
1
Turn on the Fibre Channel switch power (if used).
2
Check that the Ready LED (or equivalent) is lit on the Fibre Channel switch.
3
Turn on the ETERNUS AF/DX.
4
Check that the Ready LED is lit on the ETERNUS AF/DX.
5
Turn on the server.
8.2

Setting Up the Server to Recognize the Logical Units

Make the server recognize the logical units (LUN) set in the ETERNUS AF/DX storage systems.
1
Use the "ioscan" command to check which devices are connected.
Enter as follows for LegacyView (old format) results:
# ioscan -fn
Enter as follows for AgileView (HP-UX11iv3 and newer format) results:
# ioscan -fnN
Check that all connected devices are listed in the ioscan output and "CLAIMED" is displayed in "S/W
State".
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
21
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0