Fujitsu ETERNUS DX Disk Configuration Manual - Page 8

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 24 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages)

Print Page
Fujitsu ETERNUS DX Disk Configuration Manual
Chapter 1
Workflow
1.2

When the Multipath Driver is Used

1.2
When the Multipath Driver is Used
The documents and workflow required when a multipath driver is used are as follows.
Workflow
Setting Up the ETERNUS DX
Set the various parameters required to operate the ETERNUS DX.
•
Checking the setup and maintenance operations
"Chapter 2 Checking the Server Environment" (page 10)
-
"Chapter 4 Setting Up the ETERNUS DX" (page 13)
-
"ETERNUS Web GUI User's Guide"
-
Setting up the ETERNUS DX
•
-
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
NUS DX to be connected
Setting Up the SAS Switches
Set up the SAS switch.
"Chapter 5 Setting Up the SAS Switches" (page 14)
•
Installing the Driver
Install the appropriate driver for the SAS card being used.
•
Checking the SAS card driver versions
"Chapter 6 Installing the Driver" (page 16)
-
"Server Support Matrix"
-
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux
Copyright 2018 FUJITSU LIMITED
8
P3AM-3472-14ENZ0