Fujitsu ETERNUS DX Disk Configuratiehandleiding - Pagina 8

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 24 pagina's. Server connection, fcoe for linux driver settings for converged network adapter cards
Ook voor Fujitsu ETERNUS DX Disk: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (29 pagina's), Configuratiehandleiding (25 pagina's), Configuratiehandleiding (32 pagina's), Configuratiehandleiding (35 pagina's), Configuratiehandleiding (31 pagina's), Configuratiehandleiding (43 pagina's), Configuratiehandleiding (21 pagina's)

Pagina afdrukken
Fujitsu ETERNUS DX Disk Configuratiehandleiding
Chapter 1
Workflow
1.2

When the Multipath Driver is Used

1.2
When the Multipath Driver is Used
The documents and workflow required when a multipath driver is used are as follows.
Workflow
Setting Up the ETERNUS DX
Set the various parameters required to operate the ETERNUS DX.
•
Checking the setup and maintenance operations
"Chapter 2 Checking the Server Environment" (page 10)
-
"Chapter 4 Setting Up the ETERNUS DX" (page 13)
-
"ETERNUS Web GUI User's Guide"
-
Setting up the ETERNUS DX
•
-
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
NUS DX to be connected
Setting Up the SAS Switches
Set up the SAS switch.
"Chapter 5 Setting Up the SAS Switches" (page 14)
•
Installing the Driver
Install the appropriate driver for the SAS card being used.
•
Checking the SAS card driver versions
"Chapter 6 Installing the Driver" (page 16)
-
"Server Support Matrix"
-
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux
Copyright 2018 FUJITSU LIMITED
8
P3AM-3472-14ENZ0