Fujitsu ETERNUS DX Disk Configuratiehandleiding - Pagina 7

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 24 pagina's. Server connection, fcoe for linux driver settings for converged network adapter cards
Ook voor Fujitsu ETERNUS DX Disk: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (29 pagina's), Configuratiehandleiding (25 pagina's), Configuratiehandleiding (32 pagina's), Configuratiehandleiding (35 pagina's), Configuratiehandleiding (31 pagina's), Configuratiehandleiding (43 pagina's), Configuratiehandleiding (21 pagina's)

Chapter 1

Workflow

1.1

When the Multipath Driver is not Used

Setting Up the SAS Switches

Set up the SAS switch.

"Chapter 5 Setting Up the SAS Switches" (page 14)

•

Installing the Driver

Install the appropriate driver for the SAS card being used.

Checking the SAS card driver versions

•

"Chapter 6 Installing the Driver" (page 16)

"Server Support Matrix"

Setting Up the Server

Set the parameters required for connection to the ETERNUS DX.

"7.1 For Fujitsu SAS Cards" (page 17)

•

"7.2 For LSI Logic SAS Cards" (page 17)

•

Setting Up the Server to Recognize the Logical Units

Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX.

"Chapter 8 LUN Recognition" (page 18)

•

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0