Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Configuration Manual - Page 22

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF. Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF 29 pages. Fibre channel/ eternus dx500 s4/dx600 s4, eternus dx500 s3/dx600 s3, eternus dx8700 s3 hybrid storage systems, eternus dx400 s2 series, eternus dx8700 s2 disk storage systems, eternus af650 s2, eternus af650 all-flash arrays settings for bs2000 connection

Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Configuration Manual
Chapter 5 Set Up the BS2000 Server for ETERNUS DX/AF Storage Systems

5.3 SE Server (SU x86) and SQ-Server

5.3
SE Server (SU x86) and SQ-Server
Set up the SE Server (SU x86) or the SQ-Server for BS2000 disks on an ETERNUS DX/AF storage system.
Use the SE Manager or SQ-Manager GUI as described in the manuals "FUJITSU Server BS2000 SE300 / SE500 /
SE700, Operation and Administration" resp. "SQ Business Servers, Operation and Administration" to configure
LUNs on the ETERNUS DX/AF storage system as D3435 disk devices.
If there is a gap between the Host LUNs of an existing affinity group and a newly generated affinity group a
reboot of the SE Server or SQ-Server is necessary. If there is no gap, the new device nodes will be built
automatically online. It is recommended to create the LUNs and the required affinity groups before activation
of the FC zoning and configuration on the SE Server (SU x86) and SQ Server.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
22
Copyright 2018 FUJITSU LIMITED
P3AM-5672-10ENZ0