Fujitsu ETERNUS DX100 S3 Configuration Manual - Page 3
Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 13 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Also for Fujitsu ETERNUS DX100 S3: Configuration Manual Server Connection (12 pages), Configuration Manual Server Connection (12 pages), Configuration Manual (28 pages), Setup Manual (15 pages), Safety Precautions (12 pages)
![Fujitsu ETERNUS DX100 S3 Configuration Manual](/uploads/products/server2/2443546/2443546.jpg)
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX to a server running Solaris OS, HP-UX, AIX, Windows
®
XenServer
, Oracle Linux, or Oracle VM Server for x86 via a Fibre Channel interface.
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX, server, OS, Fibre Channel cards, and drivers.
Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations
used in this manual such as product trademarks and product names. For storage systems that are supported
by the OS, refer to the Server Support Matrix of the ETERNUS DX.
The Contents and Structure of this Manual
This manual is composed of the following two chapters.
"Chapter 1 Workflow" (page 6)
•
This chapter describes the workflow when setting up a storage system.
"Chapter 2 Setting Up the ETERNUS DX" (page 8)
•
This chapter describes how to set up a storage system.
3
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
®
, Linux, VMware ESX, PAN Manager, Citrix
Preface
®
8th Edition
June 2015
P3AM-7962-08ENZ0