Fujitsu ETERNUS DX100 S3 구성 매뉴얼 - 페이지 3
{카테고리_이름} Fujitsu ETERNUS DX100 S3에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX100 S3 13 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX100 S3에 대해서도 마찬가지입니다: 수동 서버 연결 구성 (12 페이지), 수동 서버 연결 구성 (12 페이지), 구성 매뉴얼 (28 페이지), 설정 매뉴얼 (15 페이지), 안전 주의사항 (12 페이지)
페이지 인쇄
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX to a server running Solaris OS, HP-UX, AIX, Windows
®
XenServer
, Oracle Linux, or Oracle VM Server for x86 via a Fibre Channel interface.
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX, server, OS, Fibre Channel cards, and drivers.
Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations
used in this manual such as product trademarks and product names. For storage systems that are supported
by the OS, refer to the Server Support Matrix of the ETERNUS DX.
The Contents and Structure of this Manual
This manual is composed of the following two chapters.
"Chapter 1 Workflow" (page 6)
•
This chapter describes the workflow when setting up a storage system.
"Chapter 2 Setting Up the ETERNUS DX" (page 8)
•
This chapter describes how to set up a storage system.
3
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
®
, Linux, VMware ESX, PAN Manager, Citrix
Preface
®
8th Edition
June 2015
P3AM-7962-08ENZ0