Fujitsu ETERNUS DX60 S2 Configuration Manual - Page 13

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX60 S2. Fujitsu ETERNUS DX60 S2 16 pages. Server connection. (fibre channel) for aix
Also for Fujitsu ETERNUS DX60 S2: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), User Manual (14 pages), Configuration Manual (38 pages), Hardware And Software Installation Manual (36 pages)

Print Page

Chapter 2

Setting Up the ETERNUS DX

2.2

Specific Settings

2.2

Specific Settings

Some settings are not required for some OSes and/or connection configurations.

Check the various cases described below, and perform any required settings.

2.2.1

If the system configuration matches any of the items "System configuration that requires the reset group set-

ting" in the following table, every ETERNUS DX port that connects to the given server's access paths must be

assigned to the same reset group.

For system configurations other than the following, use the default settings.

Solaris OS

AIX

Windows Server

VMware vSphere (ESXi 5.5, ESXi 5.1, ES-

Xi 5.0, ESX 4.1, ESXi 4.1, ESX 4.0, ESXi

4.0)

VMware Infrastructure 3 (ESX 3.5, ESXi

3.5)

*1: For a Windows Server

2008 based WSFC configuration, the reset group settings are not necessary.

System configuration that requires the reset group setting

Cluster configuration

Single path configuration using FJspio for a PowerHA or HACMP cluster

MSCS configuration (*1)

2003

Multipath configuration

Multiple ESX servers share ETERNUS DX LUNs (*2)

2012 R2, Windows Server

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

2012, Windows Server

2008 R2, or Windows Server

P3AM-3182-15ENZ0