Fujitsu ETERNUS DX60 S2 Руководство по конфигурации - Страница 13

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Хранение Fujitsu ETERNUS DX60 S2. Fujitsu ETERNUS DX60 S2 16 страниц. Server connection. (fibre channel) for aix
Также для Fujitsu ETERNUS DX60 S2: Руководство пользователя (35 страниц), Руководство пользователя (42 страниц), Руководство по конфигурации (28 страниц), Руководство пользователя (14 страниц), Руководство по конфигурации (38 страниц), Руководство по установке аппаратного и программного обеспечения (36 страниц)

Chapter 2

Setting Up the ETERNUS DX

2.2

Specific Settings

2.2

Specific Settings

Some settings are not required for some OSes and/or connection configurations.

Check the various cases described below, and perform any required settings.

2.2.1

If the system configuration matches any of the items "System configuration that requires the reset group set-

ting" in the following table, every ETERNUS DX port that connects to the given server's access paths must be

assigned to the same reset group.

For system configurations other than the following, use the default settings.

Solaris OS

AIX

Windows Server

VMware vSphere (ESXi 5.5, ESXi 5.1, ES-

Xi 5.0, ESX 4.1, ESXi 4.1, ESX 4.0, ESXi

4.0)

VMware Infrastructure 3 (ESX 3.5, ESXi

3.5)

*1: For a Windows Server

2008 based WSFC configuration, the reset group settings are not necessary.

System configuration that requires the reset group setting

Cluster configuration

Single path configuration using FJspio for a PowerHA or HACMP cluster

MSCS configuration (*1)

2003

Multipath configuration

Multiple ESX servers share ETERNUS DX LUNs (*2)

2012 R2, Windows Server

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

2012, Windows Server

2008 R2, or Windows Server

P3AM-3182-15ENZ0