Fujitsu ETERNUS DX60 S3 Configuration Manual Server Connection - Page 10
Browse online or download pdf Configuration Manual Server Connection for Storage Fujitsu ETERNUS DX60 S3. Fujitsu ETERNUS DX60 S3 12 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Also for Fujitsu ETERNUS DX60 S3: Configuration Manual (28 pages), Configuration Manual (13 pages), Site Planning Manual (41 pages), Safety Precautions (12 pages)
Print Page
Chapter 2
Setting Up the ETERNUS DX
2.2
Specific Settings
5
Register the Host Response in which the acquired SAS address is registered to the ETERNUS DX.
2.1.6
Allocating LUN Groups (Setting the Host Affinity)
Allocate the relationship between registered SAS hosts (SAS addresses), CA port groups, and LUN groups us-
ing the Host Affinity setting function to specify which LUNs to be accessed. This sets access restrictions to the
ETERNUS DX from each server.
Refer to "Connectivity (Basic Information)" in "ETERNUS Web GUI User's Guide" for details, and set the LUN
groups.
If the one-to-one relationship between the SAS addresses and SAS cards cannot be determined, the Host
Affinity may not be set correctly.
In this case, trying various settings may be necessary until the server is able to recognize the ETERNUS DX
logical disks.
2.2
Specific Settings
Specific settings for the OS and connection configuration are not required.
2.2.1
Setting the CA Reset Groups
Because all of the ports are configured to be members of one CA reset group in the initial setting, the reset
group settings do not need to be changed.
10
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
P3AM-8542-04ENZ0