Fujitsu ETERNUS DX60 S3 Manual de configuração Ligação do servidor - Página 10
Procurar online ou descarregar pdf Manual de configuração Ligação do servidor para Armazenamento Fujitsu ETERNUS DX60 S3. Fujitsu ETERNUS DX60 S3 12 páginas. Hybrid storage systems, all-flash arrays, power synchronized unit
Também para Fujitsu ETERNUS DX60 S3: Manual de configuração (28 páginas), Manual de configuração (13 páginas), Manual de Planeamento do Sítio (41 páginas), Precauções de segurança (12 páginas)
Imprimir página
Chapter 2
Setting Up the ETERNUS DX
2.2
Specific Settings
5
Register the Host Response in which the acquired SAS address is registered to the ETERNUS DX.
2.1.6
Allocating LUN Groups (Setting the Host Affinity)
Allocate the relationship between registered SAS hosts (SAS addresses), CA port groups, and LUN groups us-
ing the Host Affinity setting function to specify which LUNs to be accessed. This sets access restrictions to the
ETERNUS DX from each server.
Refer to "Connectivity (Basic Information)" in "ETERNUS Web GUI User's Guide" for details, and set the LUN
groups.
If the one-to-one relationship between the SAS addresses and SAS cards cannot be determined, the Host
Affinity may not be set correctly.
In this case, trying various settings may be necessary until the server is able to recognize the ETERNUS DX
logical disks.
2.2
Specific Settings
Specific settings for the OS and connection configuration are not required.
2.2.1
Setting the CA Reset Groups
Because all of the ports are configured to be members of one CA reset group in the initial setting, the reset
group settings do not need to be changed.
10
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
P3AM-8542-04ENZ0