Fujitsu ETERNUS DX60 S3 Manual de configuração Ligação do servidor - Página 8
Procurar online ou descarregar pdf Manual de configuração Ligação do servidor para Armazenamento Fujitsu ETERNUS DX60 S3. Fujitsu ETERNUS DX60 S3 12 páginas. Hybrid storage systems, all-flash arrays, power synchronized unit
Também para Fujitsu ETERNUS DX60 S3: Manual de configuração (28 páginas), Manual de configuração (13 páginas), Manual de Planeamento do Sítio (41 páginas), Precauções de segurança (12 páginas)
Imprimir página
Chapter 2
Setting Up the ETERNUS DX
2.1
Common Settings
This section explains the settings required for all server OSes, regardless of the connection configuration.
See the "ETERNUS Web GUI User's Guide" for details of how to set up and operate ETERNUS Web GUI.
2.1.1
Setting the To-server Connection Type (Setting the SAS Port Parameters)
For each connection configuration, set the indicated items only. All other parameters should be left on their
default values.
Table 2.1 SAS port parameter settings
Parameter
Reset Scope
Release Reservation if Chip is Reset
2.1.2
Creating the Server Accessible LUN Groups (Setting the LUN Groups)
Create LUN groups (Affinity Group) for the server to access. Refer to "Connectivity (Basic Information)" in
"ETERNUS Web GUI User's Guide" for details, and set the LUN groups.
When the server OS is Windows
ascending order.
The server cannot recognize the ETERNUS DX LUNs unless they are assigned in this order.
This restriction does not apply when the server is running a Solaris OS.
®
, Linux, or VMware ESX, assign SCSI LUN numbers starting from LUN0 in
8
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
®
Solaris OS, Windows
, Linux, VMware ESX
I_T_L (Default value)
Disable (Default value)
P3AM-8542-04ENZ0