Fujitsu Eternus DX90 S2 Hardware Installation - Page 21

Browse online or download pdf Hardware Installation for Storage Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 23 pages. Server connection. (fibre channel) for aix
Also for Fujitsu Eternus DX90 S2: User Manual (35 pages), User Manual (42 pages), Manual (18 pages), Instal Setup (20 pages), Configuration Manual Server Connection (13 pages), Configuration Manual (28 pages), Configuration Manual (15 pages), Configuration Manual (38 pages)

Print Page
Fujitsu Eternus DX90 S2 Hardware Installation
Operator Panel - Function Button(2)
The operation can be performed by carrying out the following
steps
To toggle the system status between "Maintenance" and "Normal"
•
Keep the Function Button pushed for three seconds
•
The MAINT/ID LED lights green when the system is in Maintenance mode
•
The MAINT/ID LED is off when the system is in Normal mode
Switch the functionality of Master CM to the other Controller Module
•
Push down the Function Button twice within three seconds
•
The Master LED lights green to indicate the Master CM
Reset the LAN ports of the CM to the default values
•
Push down the Function Button three times within three seconds
•
The MAINT/ID LED blinks green for a few seconds
Hardware Installation
ETERNUS DX80 S2 and DX90 S2
20
Copyright Fujitsu Technology Solutions, Release August 2011