Fujitsu Eternus DX90 S2 Hardware Installation - Page 19

Browse online or download pdf Hardware Installation for Storage Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 23 pages. Server connection. (fibre channel) for aix
Also for Fujitsu Eternus DX90 S2: User Manual (35 pages), User Manual (42 pages), Manual (18 pages), Instal Setup (20 pages), Configuration Manual Server Connection (13 pages), Configuration Manual (28 pages), Configuration Manual (15 pages), Configuration Manual (38 pages)

Print Page
Fujitsu Eternus DX90 S2 Hardware Installation

Power Off Procedure

Verify with the customer that all server I/O is stopped
Also confirm that the "CACHE" LED in the Operator Panel is off
Hold down the "Power Switch" of the Controller Enclosure for
approximately 5 seconds
The ETERNUS DX system will shutdown all Enclosures gracefully
In case of moving ETERNUS to a new location, you naturally
have to also disconnect the AC power cords
from the PDUs after the system is
powered off
Hardware Installation
ETERNUS DX80 S2 and DX90 S2
Make sure the CACHE LED
of the Controller Enclosure
is off
18
Copyright Fujitsu Technology Solutions, Release August 2011