Fujitsu Eternus DX90 S2 Hardware-installatie - Pagina 19

Blader online of download pdf Hardware-installatie voor {categorie_naam} Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 23 pagina's. Server connection. (fibre channel) for aix
Ook voor Fujitsu Eternus DX90 S2: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Handmatig (18 pagina's), Installeer setup (20 pagina's), Configuratiehandleiding Serververbinding (13 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (15 pagina's), Configuratiehandleiding (38 pagina's)

Power Off Procedure



Verify with the customer that all server I/O is stopped



Also confirm that the "CACHE" LED in the Operator Panel is off



Hold down the "Power Switch" of the Controller Enclosure for

approximately 5 seconds



The ETERNUS DX system will shutdown all Enclosures gracefully



In case of moving ETERNUS to a new location, you naturally

have to also disconnect the AC power cords

from the PDUs after the system is

powered off

Hardware Installation

ETERNUS DX80 S2 and DX90 S2

Make sure the CACHE LED

of the Controller Enclosure

is off