Fujitsu ETERNUS4000 400 Manual - Page 20

Browse online or download pdf Manual for Storage Fujitsu ETERNUS4000 400. Fujitsu ETERNUS4000 400 28 pages. Disk storage systems (fibre channel) for oracle solaris
Also for Fujitsu ETERNUS4000 400: Manual (21 pages), Server Connection Manual (25 pages), Server Connection Manual (32 pages), Connection Manual (19 pages)

Print Page

Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server

7.2 Setting Up the Server

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Enable CHAP authentication.

Enable CHAP authentication on the Initiator.

# iscsiadm modify initiator-node --authentication CHAP

Check that CHAP is enabled on the Initiator.

Use the "initiator-node" option.

# iscsiadm list initiator-node

Initiator node name: iqn.1986-03.com.sun:01:00144f565a49.47677520

Initiator node alias: -

Header Digest: NONE/-

Data Digest: NONE/-

Authentication Type: CHAP

CHAP Name: initiator

RADIUS Server: NONE

RADIUS access: unknown

Configured Sessions: 1

Check that CHAP is enabled on the Target.

Use the "target-param" option.

# iscsiadm list target-param -v

Target: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm1

Alias: dxlcm1port1

Bi-directional Authentication: disabled

Authentication Type: CHAP

CHAP Name: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm1

Target: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0

Alias: dxlcm0port1

Bi-directional Authentication: disabled

Authentication Type: CHAP

CHAP Name: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0

If CHAP is disabled, use the "iscsiadm" command to enable it.

# iscsiadm modify target-param -a CHAP Target_name

Example:

To set "iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0" and "iqn.2000-

09.com.fujitsu:storage-system.e2000:00001001-cm1" as the target CHAP names

#iscsiadm modify target-param -a CHAP iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0

#iscsiadm modify target-param -a CHAP iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm1

End of procedure