Brother MFC-J430w Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Software Brother MFC-J430w. Brother MFC-J430w 22 pages. Product safety guide - spanish
Also for Brother MFC-J430w: Advanced User's Manual (47 pages), Manual (12 pages), Manual (21 pages), Product Safety Manual (17 pages), Quick Setup Manual (37 pages), Safety Manual (17 pages), Quick Setup Manual (37 pages), User Manual (41 pages), Quick Start Manual (37 pages), User Manual (40 pages), (Spanish) Manual (21 pages), (Spanish) Manual (16 pages)

Print Page

Take care to match the colour of the lever with

the cartridge colour.

Install each ink cartridge in the direction of the

arrow on the label.

Gently push the back of the ink cartridge

marked "PUSH" until it clicks. After all the ink

cartridges are installed close the ink cartridge

cover.

Check the print quality

When the preparation process has finished, the

LCD shows Set Paper and Press Start.

Press Colour Start.

Check the quality of the four colour blocks on

the sheet. (black/yellow/cyan/magenta)

If all lines are clear and visible, press 1 (Yes) to

finish the quality check and go to step 6.

If you can see missing short lines, press 2 (No)

and follow the steps on the LCD.

Wireless setup

(if needed)

For wireless setup using a Macintosh computer or

mobile device, go to a.

For Windows users (all connections) and Macintosh

USB connections, go to b.

If you are using a Macintosh computer or a

mobile device on a wireless network, press

OK.

Press a or b to choose Yes.

Press OK.

Then go to step 15 on page 12 to continue the

wireless setup.

After finishing the wireless setup you will need

to return to step 7 to finish the machine setup.

Note

You can choose No to configure the wireless

settings later.

If you are using a Windows

to connect your Macintosh using USB, press

OK.

Press a or b to choose No.

Press OK.

Then go to step 7.

The wireless setup for Windows

covered in later steps.

Choose your language

Press Menu.

Press a or b to choose Initial Setup.

Press OK.

Press a or b to choose Local Language.

Press OK.

Press a or b to choose your language.

Press OK.

Press Stop/Exit.

computer or want

users will be