Brother MFC-J430w Hızlı Başlangıç Kılavuzu - Sayfa 4

Yazılım Brother MFC-J430w için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Brother MFC-J430w 22 sayfaları. Product safety guide - spanish
Ayrıca Brother MFC-J430w için: Gelişmiş Kullanıcı Kılavuzu (47 sayfalar), Manuel (12 sayfalar), Manuel (21 sayfalar), Ürün Güvenlik Kılavuzu (17 sayfalar), Hızlı Kurulum Kılavuzu (37 sayfalar), Güvenlik Kılavuzu (17 sayfalar), Hızlı Kurulum Kılavuzu (37 sayfalar), Kullanıcı Kılavuzu (41 sayfalar), Hızlı Başlangıç Kılavuzu (37 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), (İspanyolca) El Kitabı (21 sayfalar), (İspanyolca) El Kitabı (16 sayfalar)

Sayfayı Yazdır
Brother MFC-J430w Hızlı Başlangıç Kılavuzu
e
Take care to match the colour of the lever with
the cartridge colour.
Install each ink cartridge in the direction of the
arrow on the label.
f
Gently push the back of the ink cartridge
marked "PUSH" until it clicks. After all the ink
cartridges are installed close the ink cartridge
cover.
5

Check the print quality

a
When the preparation process has finished, the
LCD shows Set Paper and Press Start.
Press Colour Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes) to
finish the quality check and go to step 6.
If you can see missing short lines, press 2 (No)
and follow the steps on the LCD.
6
Wireless setup
(if needed)
For wireless setup using a Macintosh computer or
mobile device, go to a.
For Windows users (all connections) and Macintosh
USB connections, go to b.
a
If you are using a Macintosh computer or a
mobile device on a wireless network, press
OK.
Press a or b to choose Yes.
Press OK.
Then go to step 15 on page 12 to continue the
wireless setup.
After finishing the wireless setup you will need
to return to step 7 to finish the machine setup.
4
Note
You can choose No to configure the wireless
settings later.
b
If you are using a Windows
to connect your Macintosh using USB, press
OK.
Press a or b to choose No.
Press OK.
Then go to step 7.
The wireless setup for Windows
covered in later steps.
7

Choose your language

a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
®
computer or want
®
users will be