Brother MFC-J430w User Manual - Page 32

Browse online or download pdf User Manual for Software Brother MFC-J430w. Brother MFC-J430w 40 pages. Product safety guide - spanish
Also for Brother MFC-J430w: Advanced User's Manual (47 pages), Manual (12 pages), Manual (21 pages), Product Safety Manual (17 pages), Quick Setup Manual (37 pages), Safety Manual (17 pages), Quick Setup Manual (37 pages), User Manual (41 pages), Quick Start Manual (37 pages), Quick Start Manual (22 pages), (Spanish) Manual (21 pages), (Spanish) Manual (16 pages)

Print Page

Packing and shipping

the machine

When you transport the machine, use the

packing materials that came with your

machine. Follow the instructions below to

correctly package your machine. Damage

caused to your machine during transit may

not be covered by your warranty.

IMPORTANT

It is important to allow the machine to

"park" the print head after a print job.

Listen carefully to the machine before

unplugging it to make sure that all

mechanical noise has stopped. Not

allowing the machine to finish this process

may lead to print problems and possible

damage to the print head.

Open the ink cartridge cover.

Remove all four ink cartridges. Press

the ink release lever above each

cartridge to release it.

(uuBasic User's Guide: Replacing the

ink cartridges)

Install the orange protective part and

then close the ink cartridge cover.

IMPORTANT

• Make sure the plastic tab on the right side

of the orange protective part (1) clicks

securely into place (2).

• If you are not able to find the orange

protective part, ship the machine without

it. DO NOT install the ink cartridges as an

alternative before shipping.

Lift the machine from the front and hook

the tab of the orange protective part into

the keyed opening (1) on the bottom of

the paper tray. Then latch the protective

part over the raised portion of the paper

tray (2).