Brother MFC-J430w Manual do utilizador - Página 32

Procurar online ou descarregar pdf Manual do utilizador para Software Brother MFC-J430w. Brother MFC-J430w 40 páginas. Product safety guide - spanish
Também para Brother MFC-J430w: Manual do utilizador avançado (47 páginas), Manual (12 páginas), Manual (21 páginas), Manual de Segurança do Produto (17 páginas), Manual de configuração rápida (37 páginas), Manual de Segurança (17 páginas), Manual de configuração rápida (37 páginas), Manual do utilizador (41 páginas), Manual de início rápido (37 páginas), Manual de início rápido (22 páginas), (Espanhol) Manual (21 páginas), (Espanhol) Manual (16 páginas)

Brother MFC-J430w Manual do utilizador
Packing and shipping
the machine
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
correctly package your machine. Damage
caused to your machine during transit may
not be covered by your warranty.
IMPORTANT
It is important to allow the machine to
"park" the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this process
may lead to print problems and possible
damage to the print head.
a
Open the ink cartridge cover.
b
Remove all four ink cartridges. Press
the ink release lever above each
cartridge to release it.
(uuBasic User's Guide: Replacing the
ink cartridges)
c
Install the orange protective part and
then close the ink cartridge cover.
28
IMPORTANT
• Make sure the plastic tab on the right side
A
of the orange protective part (1) clicks
securely into place (2).
• If you are not able to find the orange
protective part, ship the machine without
it. DO NOT install the ink cartridges as an
alternative before shipping.
d
Lift the machine from the front and hook
the tab of the orange protective part into
the keyed opening (1) on the bottom of
the paper tray. Then latch the protective
part over the raised portion of the paper
tray (2).
1
1
2
2