Fujitsu FTP-639MCL354 Product Specification - Page 9

Browse online or download pdf Product Specification for Printer Fujitsu FTP-639MCL354. Fujitsu FTP-639MCL354 26 pages.

Print Page
3-4

Standard specifications

Item
Printing method
Valid printing width 72 mm
Dot  ｓ ｔ ｒ ｕ ｃ ｔ ｕ ｒ ｅ
Dot pitch(rsolution) 0.125 mm (8 dots/mm)
Dot size
Printing   ｄ ｅ ｎ ｓ ｉ ｔ ｙ
Printing speed
Highly sensitive
paper
Standard
paper
Middle-term
ｐ ｒ ｅ ｓ ｅ ｒ ｖ ａ ｂ ｌ ｅ
Long-term
ｐ ｒ ｅ ｓ ｅ ｒ ｖ ａ ｂ ｌ ｅ
Paper feeding
method
Paper feeding precision
Line gap in one print
line by enable drive
Thermal head
temperature
detection
Paper detection
Mark detection
Platen release
External dimensions
(W x D x H)
Weight
Average resistance of
the ｔ ｈ ｅ ｒ ｍ ａ ｌ   head
*1:
If any other paper except for the specified above is used, through the mutual discussion, the paper shall be
evaluated, checked and adoption shall be determined.
Date
Design
Inspection
Rev.
Design
Direct thermosensitive method
576 dots /line
0.125mm×0.16mm
OD value greater than 0.8, in use of the specified paper under our standard printing
conditions.
※Measuring device: Sakura densitometer, PDA-65, by Konika Co., Ltd.
200mm/s [24V drive, Standard paper(PD150R equivalent), Room temperature,
High speed mode]
TF50KS-E4
(width: 82.5
TF60KS-E
(width: 82.5
PD150R
(width: 82.5
TP60KS-F1
(width: 82.5
P220VBB-1 (width: 82.5
PD170R
(width: 82.5
TP50KJ-R
(width: 82.5
AFP-235
(width: 82.5
PD160R-N
(width: 82.5
HA220AA
(width: 82.5
Friction feeding (1 dot line/2 pulses, bi-polar 1-2 phase excitation)
±5% At  fixed-speed  feed  with   the  back  tention  ｏ ｆ   0.49N  ｏ ｒ   less (±2% at
25℃ and RH 60％)
Less than 0.125 mm, the step difference between the right and left printing lines.
Thermistor
Photo interrupter
Sliding swich
109.7±1mm×62.5±0.5mm×37.7±0.5mm (excluding FPC)
Refer to the outer dimension drawing in section 3-5 for details.
Approx 320g
800 Ω  ±3%
Changes made
Inspect.
Specifications
+0
mm),
Nippon Paper
-1
+0
mm),
Nippon Paper
-1
+0
mm),
Oji Paper
-1
+0
mm),
Nippon Paper
-1
+0
mm),
Mitsubishi Paper
-1
+0
mm),
Oji Paper
-1
+0
mm),
Nippon Paper
-1
+0
mm),
Mitsubishi Paper
-1
+0
mm),
Oji Paper
-1
+0
mm),
Mitsubishi Paper
-1
FTP-639MCL354 SPECIFICATION
   A1NA02273-0354
FUJITSU COMPONENT LIMITED
Approv.
Submit to
9
26