Fujitsu Stylistic 3400 User Manual - Page 3

Browse online or download pdf User Manual for Tablet Fujitsu Stylistic 3400. Fujitsu Stylistic 3400 3 pages. Wall-mount cradle
Also for Fujitsu Stylistic 3400: Installation Manual (4 pages), User Manual (2 pages), Operating Instructions (1 pages), Installation And User Manual (8 pages), Installation Manual (1 pages), Assembly And Use Instructions (4 pages)

Print Page

Figure 5. Installing the Stylistic 3400

5. Turn on the peripherals attached to the mini-dock.

6. Press the Suspend/Resume button to resume Stylistic

3400 system operation.

Note: If the required driver software for a

connected peripheral device is not installed,

the device may not work or may work

incorrectly. Contact your local help desk or

refer to the documentation provided with

your peripheral device and install the driver

software at this time.

You can now use your Stylistic 3400 with the

peripheral devices connected to the mini-dock.

Removing the Stylistic 3400

Follow these steps to remove your pen tablet.

1. Suspend operation of your Stylistic 3400 by pressing

the Suspend/Resume button or by shutting down from

the Start menu.

2. Turn off peripheral devices that are connected to the

mini-dock.

3. Hold the base of the mini-dock with one hand, and

with your free hand, firmly hold and pull the Stylistic

3400 out of the mini-dock in a straight line.

4. Press the Suspend/Resume button to resume

operation of your Stylistic 3400.

3/00

Adjusting the Stylistic 3400's Viewing

Your mini-dock allows you to adjust your Stylistic 3400

to a comfortable viewing angle. There are five positions

on the stand to which you can adjust the viewing angle

of your pen tablet. (Figure 6.)

Metal

Bail

Stand

Figure 6. Adjusting the viewing angle

To adjust your pen tablet's viewing angle:

1. Release the metal bail from the stand by firmly

pulling it up from the groove on the stand.

2. With one hand, hold and adjust the pen tablet to your

desired viewing angle; use your free hand to position

the metal bail in the appropriate groove on the stand,

then press until it snaps in place.

3 of 3

Angle0

58-0712-00A